Performance
Product advantages
- Solvent-free.
- Easy to apply.
- High mechanical strength.
- Watertight.
- Can adhere even on humid surfaces.
- Perfect adhesion on concrete and steel.
Construction SystemsEpoxy Based Anchoring and Montage Repair Mortar
YAPIFINE MEND® EPOXY 2C
Epoxy-resin based, two compenant anchorage and montage repair mortar.
Request Product InformationTechnical profile
Material data,
at a glance.
Key properties and declared technical characteristics for product selection and initial evaluation.
- Colour
- Grey Time Required for Attaining Full Strength 7 days
- Mixture Ratio
- 3 / 1 (Component A / Component B)
- Flexural Strength
- ≥ 20 N/mm²
- Mixture Density
- 1.80 kg/L ± 0.05 Compressive Strength ≥ 75 N/mm²
- Mixed Product Time Before Use (+20°C)
- 40 minutes Adhesive Strength to Concrete ≥ 2 N/mm²
- Service Temperature
- Between -15 °C and +90 °C Adhesive Strength to Metal ≥ 2 N/mm²
- Application Thickness
- min. 2 mm, max. 30 mm Restrained Shrinkage / Expansion ≥ 2 N/mm²
- Glass Transition Temperature
- ≥ 45 °C Reaction to Fire Elastic Modulus
Application range
Areas of use
- Planting any kind of ironstone, installation of anchorage elements
- Crack repair and isolation of concrete, crack injection and crack isolation
- Sticking dilatation tapes (EPDM, PVC, TPO, TPE)
- Repairing any kind of structural concrete
- Assembly and adhering of any kind of metal component on concrete or steel component
Use guidance
From selection
to application.
Application
For Repair Usage; It should be applied by trowel or spatula when the primer is wet on the substrate. For anchoring reinforcement bars; The hole should be 6 mm larger than the reinforcement to be installed. The material mixed homogeneously should be poured into the holes which was prepared with necessary diameter and depth. 2/3rd of the depth should be filled. The reinforcement to be applied should be placed in the hole carefully by rotating slowly. You should observe whether the material over flows. All tools used should be cleaned up with thinner after the application. Once hardened, mechanical methods are required to free the surface from residual product.
Specification & supply
Standards, formats
and handling.
Packaging
- Can set of 5 kg (Component A: 3.75 kg + Component B: 1.25 kg)
Storage
The shelf life of the product is 12 months when it is stored on wooden pallets in a cool, dry and moisture free environment with an ambient temperature between +10°C and +25°C.