Performance
Product advantages
- Solvent-free.
- Resistant against friction and abrasion.
- Elastic structure.
- Ensures joint-free, monolithic surface.
- Easy to clean.
- Hygienic.
- Does not require maintenance for a long time.
- Easy to apply.
Construction SystemsTwo Component Polyurethane Based Self Levelling Coating
YAPIFINE BASE® PU
Polyurethane based, solvent free, two component, self levelling glossy floor coating with high chemical abrasive strength and crack bridging feature.
Request Product InformationTechnical profile
Material data,
at a glance.
Key properties and declared technical characteristics for product selection and initial evaluation.
- Colour
- White / Grey / Terracotto / Blue / Green Adhesive Strength to Concrete ≥ 2 N/mm²
- Mixture Ratio
- 4,5 / 1 (Component A/ Component B) Tensile Strength ≥ 50 N/mm²
- Pot Life (+20°C)
- 25 minutes Abrasion Resistance by Taber Abraser 70 mg
- Density (+20°C)
- 1.60 g/cm³ Hardness (Shore D) (7 days) 83
- Application Temperature
- Between +5°C to +30°C Permeability to Water Vapour Class 1
- Step Over Time
- 16 hours Capillary Water Absorpsion ≤ 0.5 kg/(m².h0.5)
- Full Cure
- 48 hours Permeability to CO2 Sd > 50
- Resistance Against Chemical and Mechanical Loads
- 7 days Reaction to Fire E
Application range
Areas of use
- Factories
- Storage areas
- Parking lots
- Concrete floors requiring chemical and mechanical strength
- Floors requiring high abrasive resistance and strength
- Stores and offices
- Cold storages
- Schools and hospitals
Use guidance
From selection
to application.
Application
Before beginning the application the relative humidity and the dewpoint should be checked, and then begin the application only if the appropriate conditions are met. YAPIFINE BASE PU is poured onto the primed surface. The product is then spread onto the surface with a notched trowel. Afterwards a spiked roller is used in order to remove the trapped air from the material. The prepared mixture should be used within 40 minutes.
Specification & supply
Standards, formats
and handling.
Packaging
- Tin buckets set of 22 kg. (18 kg + 4 kg)
Storage
The shelf life of the product is 12 months when it is stored on wooden pallets in a cool, dry and moisture free environment with an ambient temperature between +10°C and +25°C. The opened material should be used as soon as possible.