YAPIFINE BASE EPOXY COAT

Chemically cured, solvent free, two component, epoxy based floor coating

Request Product Information

Technical profile

Material data,
at a glance.

Key properties and declared technical characteristics for product selection and initial evaluation.

Colour: Grey / White / RAL Colours
Density (+20°C): 1 g/cm³ ± 0.05 Compressive Strength ≥ 45 N/mm²
Mixture Ratio: 3,8 / 1 (A component / B component) Adhesive Strength to Concrete ≥ 4 N/mm²
Appearance: Glossy Adhesive Strength to Metal ≥ 3 N/mm²
Pot Life (+20°C): 40 minutes Abrasion Resistance by Taber Abraser 70 mg
Drying Period (at +23°C, 55% relative humidity): Drying time: 10 hours Time for new coat: 8-24 hours Through-dry time: 7 days Hardness (Shore D) (7 days) 80
Permeability to Water Vapour: Class 1
Capillary Water Absorpsion: ≤ 0,5 kg/(m².h0,5)
Temperature Resistance: 121°C dry Permeability to CO2 Sd > 50
Application Temperature: +10°C ile +30°C Reaction to Fire E

Performance

Product advantages

High chemical strength against alkali, dilute acid, sewage, water, oil products, mineral oils and fuels.
High mechanical strength and abrasive strength.
Provides good film after curing. Creates joint-free surface.
Easy to clean thanks to smooth surface.
Easy to apply.

Application range

Areas of use

Indoor and outdoor spaces
Food production and storage facilities
Shopping malls and supermarkets
Areas subject to light-medium industrial loads
Sewage and waste plants
Parking lots, walking trails
Pulp and paper factories
Refineries, warehouses and factories

Use guidance

From selection
to application.

Application

The product is spread on the floor, which is lined and for which the surface is prepared so as to ensure prescribed thickness, by means of trowel. On top coat, apply texture roller on the surface to ensure desired pattern. Wait for minimum 4 days before taking into service. Do not keep the equipments in use for more than 40 minutes in the mixture; in case of delay, wash equipments with epoxy thinner. Even though YAPIFINE BASE EPOXY COAT is solvent-free, proper ambient ventilation will help protecting the operator, prevent condensation on paint film and ensure optimum coating performance. Ventilation should continue during curing as well.

Specification & supply

Standards, formats
and handling.

Packaging

Tin buckets set of 19 kg + 5 kg

Storage

12 months as of production date in cool, dry and damp-free spaces of +5°C to +25°C, on wooden pallets, without unpacking. Use the unpacked materials as soon as possible.