ARSET PUMP

ARSET PUMP is a chemical additive that provides easy and uninterrupted pumping of concrete.

Request Product Information

Technical profile

Material data,
at a glance.

Key properties and declared technical characteristics for product selection and initial evaluation.

Chemical Base: Inorganic material
Color / Appearance: Light cream liquid
pH: 4,00 – 7,00
Density: 1,10 ± 0,02 g/cm3
Chlorine Content (%): <0,1 (EN 480-10)
Alkaline Content (%): <10,0 (EN 480-12)
Corrosion Behavior: Contains only components according EN 934-1 Annex A.1
Dangerous Substances: Comply with annex AZ

Performance

Product advantages

It provides a continuous and homogeneous concrete.
It enables the concrete to be pumped horizontally and vertically over long distances.
It prevents the abrasion of concrete pumps and pipes.
It does not have a negative effect on the properties of concrete.
It does not contain chlorine.

Application range

Areas of use

For lubrication of the pumping line before pumping in all kinds of concrete
Concrete mixes that are not suitable for pumping, do not have suitable granulometry, have low thin material ratios, have the risk of segregation, and cause high pressure

Use guidance

From selection
to application.

Application

As a concrete additive in the concrete mixture in the plant; ARSET PUMP is added to the aggregate cement mixture after the water is added in the plant. The material shows its effect after 2-3 minutes of concrete mixing. As a concrete admixture, in the ready mixed concrete mixture in the transmixer at the construction site; It is added to the ready-mixed concrete in the truck mixer and mixed for 2-3 minutes. By evacuating into the pump inlet chamber; ARSET PUMP is diluted with water at an average ratio of 1: 1 and poured into the concrete inlet chamber of the pump. The concrete pump runs idle for a few minutes. When the water in the line is drained, the pump is ready for use.

Dosage

In concrete that is difficult to pump; Average 0.2 - 0.4% of cement weight To reduce the pump pressure; Average 0.5 - 1.0% of cement weight By evacuating into the pump inlet chamber; Average 2.0 - 4.0% of cement weight

Specification & supply

Standards, formats
and handling.

Standards

Arset Pump TS EN 934-2

Packaging

30 kg plastic drum
250 kg drum
1000 kg container

Storage

Shelf life is 12 months from the date of production when stored in original unopened and undamaged packages (drums, barrels, IBC containers) at temperatures between +5 °C and +35 °C, protecting from direct sunlight, excessive heat and frost. If the product has waited for a long time, make it homogeneous by mixing slowly at low speed with mechanical methods before using the product. Some subsidence may occur during long-term storage. In this case, the product can be used by filtering. Make sure that the product does not freeze.