ARSET CORROSTOP

ARSET CORROSTOP is an additive material consisting of organic and inorganic materials that slows down the formation of corrosion in the reinforcement in concrete. Thanks to the efficiency of the components in the additive material, the molecules dissipate and cover the pores in the concrete, at the same time they form a protective layer that prevents corrosion by covering the steel reinforcement. Depending on the structure of the concrete, it shows properties that slow down or prevent corrosion.

Request Product Information

Technical profile

Material data,
at a glance.

Key properties and declared technical characteristics for product selection and initial evaluation.

Chemical Base: Calcium nitrite based
Color / Appearance: Light yellow liquid
pH: 4,00 – 7,00
Density: 1,22 ± 0,03 g/cm3
Chlorine Content (%): <0,1 (EN 480-10)
Alkaline Content (%): <10,0 (EN 480-12)
Corrosion Behavior: Contains only components according EN 934-1 Annex A.1
Dangerous Substances: Comply with annex AZ

Performance

Product advantages

Extends the life of concrete.
It extends the life of the reinforcement by preventing aggressive chemicals and moisture that may damage the steel reinforcement.
It does not contain chlorine.

Application range

Areas of use

In all types of reinforced concrete
In precast concrete
In prestressed concretes
In foundation concretes
In retaining walls
In parking lots
In bridges and tunnels
In marine structures
In concrete that will be affected by aggressive environments

Use guidance

From selection
to application.

Application

ARSTEP CORROSTOP is added to the concrete mixture after 70% of the mixing water is used. Since ARSET CORROSTOP contains water and the addition of admixture will increase the total concrete water / cement ratio, the concrete mixture water should be reduced in the ready-mixed concrete plant and the mixture design should be done accordingly.

Dosage

It is used at a rate of 2.0 - 6.0% of the total amount of binder. Optimum utilization rate should be determined according to laboratory trials.

Specification & supply

Standards, formats
and handling.

Standards

Arset Corrostop ASTM C 494 Type C

Packaging

30 kg plastic drum
250 kg drum
1000 kg container

Storage

Shelf life is 12 months from the date of production when stored in original unopened and undamaged packages (drums, barrels, IBC containers) at temperatures between +5 °C and +35 °C, protecting from direct sunlight, excessive heat and frost. If the product has waited for a long time, make it homogeneous by mixing slowly at low speed with mechanical methods before using the product. Some subsidence may occur during long-term storage. In this case, the product can be used by filtering. Make sure that the product does not freeze.