YAPIFINE HYDRA® SHOCK

Polymer reinforced single component waterproofing material that rapidly sets and is used in the insulation and repair of active water leaks.

Request Product Information

Technical profile

Material data,
at a glance.

Key properties and declared technical characteristics for product selection and initial evaluation.

Appearance: Grey powder Adhesion Strength to Underlayer ≥ 1 N/mm²
Pot Life: max. 1 minute Flexural Strength ≥ 4 N/mm²
Final Drying: 2 minutes Compressive Strength ≥ 25 N/mm²
Application Temperature: Between +5°C and +30°C Reaction to Fire A1
Service Temperature: -20°C / +80°C

Performance

Product advantages

Easy to apply.
Rapid strength gain.
Doesn’t shrink.
High compressive strength.
By expanding in the opposite direction of the water flow rapidly sets and stops the water flow.
Is chlorine-free, doesn’t corrode the iron reinforcement.

Application range

Areas of use

Walls and floors
Basements, foundations, shear walls and elevator shafts
Water tanks and pools
Insulation of water leaks in concrete pipes

Use guidance

From selection
to application.

Application

Since the prepared mortar begins setting with the increase in temperature, it is swiftly given shape with hand and then with a single move it is held strongly against the area where the leak is coming from and is pressed against the leak by hand for at least 30 seconds. Since the product sets quickly the process should be completed within 1 minute. The application should start from the outer areas of the leak and move towards the center. Leaks coming from deep holes can be insulated with more than one layers of application.

Specification & supply

Standards, formats
and handling.

Packaging

3 kg plastic drum

Storage

The shelf life of the product is 6 months when stored in its original packaging in a dry (maximum relative humidity 60%), cool (ambient temperature between +10°C and +25°C) and moisture-free environment.