ARSET KUR Series

ARSET KUR SERIES products are a acrylic copolymer or paraffin based one component curing compound that is applied on cementitious surfaces. Applied onto the poured fresh concrete to prevent fast loss of water.

Request Product Information

Technical profile

Material data,
at a glance.

Key properties and declared technical characteristics for product selection and initial evaluation.

Chemical Base: Acrylic copolymer or paraffin based Color / Appearance Homogeneous liquid

Performance

Product advantages

Ready-to-use can be applied easily.
Prevents shrinkage by reducing water loss rate of fresh concrete.
Chloride and organic solvent-free.
Minimizes cracks.
Decreases dusting on the surface.
It allows for curing of the concrete and achieving maximum performance without affecting the normal setting of concrete by means of retaining the water within the concrete by means of the thin film it creates on the surface.
It must be used especially all kinds of weather conditions in high evaporation. It prevents the shrinkage cracks and surface dusting.
It does not prevent the adherence of cementitious and gypsum plasters to be applied on it.

Application range

Areas of use

On the fresh concrete and screed surfaces
At the surface hardener applications
In order to prevent concrete mixing water evaporation after removing the moulds
At airport concrete and aprons
Irrigation channels
This product can be applied in all kinds of field concrete, channel and flume concretes and all of the surface curing applications

Use guidance

From selection
to application.

Application

ARSET KUR SERIES products are applied directly by a brush, a roll or by spraying on the surface when the surface is started to become mat after fresh concrete is poured and leveling process is completed. It should be applied approximately 30-45 minutes after surface hardener process has finished depending on the ambient temperature. It should be applied after removing the moulds. Dust, dirt and other items on the existing surface that prevent bonding should be cleaned before the application. It gives a transparent, mat appearance after the application.

Dosage

The usage of ARSET KUR SERIES products varies depending on the ambient temperature, humidity and wind.

Specification & supply

Standards, formats
and handling.

Packaging

30 kg plastic drum
250 kg drum
1000 kg container

Product variants

ARSET KUR AC
ARSET KUR P

Storage

Shelf life is 12 months from the date of production when stored in original unopened and undamaged packages (drums, barrels, IBC containers) at temperatures between +5 °C and +35 °C, protecting from direct sunlight, excessive heat and frost. If the product has waited for a long time, make it homogeneous by mixing slowly at low speed with mechanical methods before using the product. Make sure that the product does not freeze.