ARSET DOZ Series

ARSET DOZ SERIES products are a concrete consistency regulating re-dosing admixture that is mixed to concrete on site to improve pumpability and placing of concrete with low consistency.

Request Product Information

Technical profile

Material data,
at a glance.

Key properties and declared technical characteristics for product selection and initial evaluation.

Chemical Base: Polymer based
Color / Appearance: Homogeneous liquid
Chlorine Content (%): <0,1 (EN 480-10)
Alkaline Content (%): <10,0 (EN 480-12)
Corrosion Behavior: Contains only components according EN 934-1 Annex A.1
Dangerous Substances: Comply with annex AZ

Performance

Product advantages

Improves workability of concrete with low consistency.
Ensures workability of concrete by increasing the lost viscosity without addition of water
Prevents strength loss of concrete.
Shortens pumping time.
By improving concrete consistency, it makes pumpability possible.
Do not contain chloride or any other components that result in corrosion in the reinforcements. Therefore, it is suitable for use in reinforced concrete structures.

Application range

Areas of use

Ready mix concrete and in pouring precast concrete
In eliminating loss of viscosity due to hot, windy and humid weather
In pouring concrete with a long period of delay

Use guidance

From selection
to application.

Application

ARSET DOZ SERIES products used by directly mixing into the concretes which has difficulty compacting due to loss of viscosity. After the admixture is added to the concrete, further mixing within the truck mixer obtaining at the maximum speed (~15 rpm) for 3 minutes is required for homogenous mixture. After adding ARSET DOZ upon validating by slump testing and observation, if the required slump level is obtained concrete pumping can be started.

Dosage

ARSET DOZ SERIES products’ dosage should be adjusted according to the total amount of binder in the mixture design. This ratio varies according to the cement, aggregate, mineral additive, water components used in concrete mixture design and also the desired fresh and hardened concrete properties. Therefore, before determining the usage rate, laboratory tests should be made according to the properties expected from fresh and hardened concrete and the mixing ratio should be determined according to these tests.

Specification & supply

Standards, formats
and handling.

Standards

Arset Doz Series TS EN 934-2

Packaging

30 kg plastic drum
250 kg drum
1000 kg container

Product variants

ARSET DOZ 35
ARSET DOZ 50
ARSET DOZ 80
ARSET DOZ 95
ARSET DOZ 100

Storage

Shelf life is 12 months from the date of production when stored in original unopened and undamaged packages (drums, barrels, IBC containers) at temperatures between +5 °C and +35 °C, protecting from direct sunlight, excessive heat and frost. If the product has waited for a long time, make it homogeneous by mixing slowly at low speed with mechanical methods before using the product. Make sure that the product does not freeze. If the product freezes, it should be thawed by keeping it at room temperature without using direct heat and mixed by mechanical methods until it becomes homogeneous.